Most likely silver maple or another pale maple; alternatives include poplar or basswood.
Acer saccharinum (probable); Populus spp. or Tilia americana are alternatives. · Hardwood (temperate deciduous).
AI-generated identification · may be incorrect- Type
- Hardwood (temperate deciduous).
- Origin
- Eastern and central North America, especially floodplains and moist bottomlands.
- Hardness
- Silver maple: about 750 lbf, Soft by the requested scale; hard maple would be about 1,450 lbf (Hard).
- Durability
- Slightly durable; generally poor resistance to decay, insects, and outdoor weathering.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine and subdued, with low-contrast growth bands; appears flat-sawn or plain-sawn. No distinctive figure is visible.
Color & Appearance
Very pale cream to grayish-white, with little heartwood–sapwood contrast and a satin-to-low luster. Maple commonly yellows slightly with age and light exposure.
Hardness (Janka)
Silver maple: about 750 lbf, Soft by the requested scale; hard maple would be about 1,450 lbf (Hard).
Durability & Decay Resistance
Slightly durable; generally poor resistance to decay, insects, and outdoor weathering.
Value & Age
Approximately $2–$5 per board foot for common, clear silver maple; regional pricing varies.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not reliably estimable from this clean, unfinished surface; it appears relatively fresh or lightly aged.
Common Uses
Furniture parts, cabinetry, crates, millwork, interior trim, turning, pallets, and pulp.
Geographic Origin
Eastern and central North America, especially floodplains and moist bottomlands.
Workability
Cuts, glues, sands, and finishes readily, though soft fibers may dent and machining can produce fuzzy surfaces or minor tearout.
Finish Recommendations
Sand progressively and seal before stain to reduce blotching; clear lacquer, shellac, oil, or polyurethane are suitable.
Notable Features
Lightweight, fine-textured, bland-looking wood with modest natural luster; end grain is needed for confident separation from poplar or basswood.
