Likely White Oak, with Red Oak or ash as alternatives
Quercus alba (alternatives: Quercus rubra or Fraxinus spp.) · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- Eastern and central North America, especially the Appalachian and Midwestern regions.
- Hardness
- About 1,360 lbf Janka; Hard.
- Durability
- Durable; white oak has good decay and moisture resistance, while insect resistance is moderate. The image alone cannot confirm species.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, open-pored grain with subtle ray fleck and broad, pale flat-sawn bands; the visible panel appears lightly figured rather than quarter-sawn.
Color & Appearance
Pale cream to light tan heartwood and sapwood with moderate luster; the surrounding finished wood is amber-brown from stain or aging. Unfinished oak typically deepens somewhat with light exposure.
Hardness (Janka)
About 1,360 lbf Janka; Hard.
Durability & Decay Resistance
Durable; white oak has good decay and moisture resistance, while insect resistance is moderate. The image alone cannot confirm species.
Value & Age
Approximately $6–$12 per board foot for clear kiln-dried white oak; figured or specialty stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Indeterminate; the finish and wear suggest a used or older assembly, but no reliable calendar age can be inferred.
Common Uses
Furniture, flooring, cabinetry, architectural millwork, barrels, doors, and boatbuilding.
Geographic Origin
Eastern and central North America, especially the Appalachian and Midwestern regions.
Workability
Machines and sands well, though open pores and occasional tear-out require sharp cutters. Predrilling is advisable; it glues and finishes reliably.
Finish Recommendations
Sand evenly, fill pores if a smooth surface is desired, then use oil, lacquer, shellac, or polyurethane; test compatibility over the existing finish.
Notable Features
Open pores, prominent medullary rays, substantial weight, and characteristic oak ray fleck.
