Likely eastern white pine; other pine species are possible.
Pinus strobus (if eastern white pine); species-level identification is uncertain from the photo. · Softwood
AI-generated identification · may be incorrect- Type
- Softwood
- Origin
- If eastern white pine, native to eastern North America; the photo cannot establish species or origin.
- Hardness
- 380 lbf, approximately; Very Soft. Rating varies among pine species.
- Durability
- Slightly Durable; untreated pine has limited resistance to decay, insects, and weathering.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, prominent alternating light and darker longitudinal bands, likely from growth rings and flat-sawn grain. No obvious decorative figure; end grain is not clearly visible.
Color & Appearance
Pale cream to light tan with darker brown growth-ring bands. The surface appears unfinished; pine typically yellows and deepens toward amber with light and age.
Hardness (Janka)
380 lbf, approximately; Very Soft. Rating varies among pine species.
Durability & Decay Resistance
Slightly Durable; untreated pine has limited resistance to decay, insects, and weathering.
Value & Age
Common pine lumber is roughly US$2–6 per board foot retail, varying by region, dimensions, and grade.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot estimate reliably from appearance; the clean, pale surface shows little visible patina or wear.
Common Uses
Furniture, shelving, interior trim, cabinetry, carving, and general construction.
Geographic Origin
If eastern white pine, native to eastern North America; the photo cannot establish species or origin.
Workability
Generally easy to cut, plane, sand, and fasten; soft fibers can dent, and resin or knots may complicate machining and finishing.
Finish Recommendations
Sand evenly and seal knots if present; use a conditioner before stain to reduce blotching. Clear oil, varnish, or polyurethane are suitable.
Notable Features
Lightweight, conspicuous growth-ring contrast, and often resinous; the photographed board appears clear and evenly grained.
