Likely oak, possibly white oak; red oak is an alternative.
Quercus spp. (likely Quercus alba; species cannot be confirmed from this image) · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- Oak is native to temperate regions of the Northern Hemisphere; likely candidates white and red oak grow widely in eastern North America.
- Hardness
- White oak: about 1,360 lbf, Hard; red oak: about 1,290 lbf, Hard.
- Durability
- White oak is Durable and notably decay-resistant; red oak is Slightly Durable and less suitable for prolonged wet exposure. Species is uncertain.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Straight to mildly irregular grain with prominent rays and flecking consistent with oak; the sawn face and image do not establish cut orientation or show a distinctive figure.
Color & Appearance
Pale tan to medium brown with subtle variation; surface appears rough-sawn and oxidized. Oak typically darkens with age and light exposure.
Hardness (Janka)
White oak: about 1,360 lbf, Hard; red oak: about 1,290 lbf, Hard.
Durability & Decay Resistance
White oak is Durable and notably decay-resistant; red oak is Slightly Durable and less suitable for prolonged wet exposure. Species is uncertain.
Value & Age
Rough-sawn domestic oak commonly ranges around $5–$12 USD per board foot, varying substantially with species, grade, thickness, and region.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not reliably estimable from the image; surface oxidation and rough milling alone do not indicate the tree's age or time since cutting.
Common Uses
Furniture, flooring, cabinetry, veneer, barrels, interior trim, and—especially for white oak—boatbuilding and exterior applications.
Geographic Origin
Oak is native to temperate regions of the Northern Hemisphere; likely candidates white and red oak grow widely in eastern North America.
Workability
Machines and finishes well, though rays can cause tearout; pre-drill near edges and use sharp cutters. Glues readily.
Finish Recommendations
Sand progressively, then use oil, shellac, lacquer, or polyurethane; test stain first because oak’s open pores can produce uneven color.
Notable Features
Visible ray fleck supports oak; white oak has plugged pores that improve liquid resistance. No scent or acoustic properties can be assessed here.
