Likely Eastern white pine; similar soft pines are possible.
Pinus strobus (tentative) · Softwood
AI-generated identification · may be incorrect- Type
- Softwood
- Origin
- Eastern white pine is native to eastern North America; similar-looking pines grow broadly across North America.
- Hardness
- About 380 lbf Janka; Very Soft.
- Durability
- Slightly Durable; generally poor resistance to decay and insects, especially outdoors or in contact with moisture.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Straight, even, widely spaced growth rings with a mild cathedral pattern on the broad face; no obvious decorative figure. The visible end grain is consistent with a softwood but lacks enough detail for firm species identification.
Color & Appearance
Pale cream to yellow-tan, with subtle growth-ring contrast and no clearly distinct heartwood/sapwood boundary. Pine typically deepens toward honey-yellow with age and light exposure.
Hardness (Janka)
About 380 lbf Janka; Very Soft.
Durability & Decay Resistance
Slightly Durable; generally poor resistance to decay and insects, especially outdoors or in contact with moisture.
Value & Age
Common clear or knotty pine often retails around US$3–8 per board foot; grade and region strongly affect price.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be estimated reliably from this image; the clean, pale surface shows little visible patina or wear.
Common Uses
Interior trim, furniture, paneling, cabinetry, carving, and general light construction.
Geographic Origin
Eastern white pine is native to eastern North America; similar-looking pines grow broadly across North America.
Workability
Cuts, planes, sands, and glues easily, but its softness can cause dents, fuzzy surfaces, and crushed fibers; resinous knots may gum tools.
Finish Recommendations
Sand evenly and apply a compatible sealer or conditioner before stain to reduce blotching; clear oil, shellac, lacquer, or polyurethane are suitable.
Notable Features
Lightweight, relatively low-density wood with conspicuous annual rings; knots and resin pockets are common in many grades.
