Likely red oak; alternatives include white oak or ash — Quercus rubra (likely)

Likely red oak; alternatives include white oak or ash

Quercus rubra (likely) · Hardwood

AI-generated identification · may be incorrect
Type
Hardwood
Origin
Eastern and central North America; widely grown and commercially milled across the United States and Canada.
Hardness
1,290 lbf Janka — Hard
Durability
Moderately durable; heartwood has fair decay resistance, while sapwood is more vulnerable to insects and rot.

Got a wood sample like this?

Identify any wood from a photo, free.

Identify wood

Grain Pattern

Predominantly straight, open-pored grain with subtle cathedral/flat-sawn variation; no prominent figure visible.

Color & Appearance

Pinkish tan to reddish-brown heartwood with lighter sapwood and moderate luster; typically darkens slightly and becomes warmer with age and light.

Hardness (Janka)

1,290 lbf Janka — Hard

Durability & Decay Resistance

Moderately durable; heartwood has fair decay resistance, while sapwood is more vulnerable to insects and rot.

Value & Age

Estimated Market ValueNot an official valuation

Approximately $4–$8 per board foot for clear kiln-dried lumber; figured or premium stock may cost more.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate
Appears freshly milled or lightly weathered; the image does not show enough patina or wear to estimate tree age or sample age.

Common Uses

Furniture, flooring, cabinetry, millwork, veneer, interior trim, and general construction.

Geographic Origin

Eastern and central North America; widely grown and commercially milled across the United States and Canada.

Workability

Machines and sands well, though its open pores and occasional interlocked grain can cause tear-out; glues, nails, and screws reliably with pilot holes recommended.

Finish Recommendations

Sand to 150–180 grit, fill pores if a smooth surface is desired, then apply stain, oil, lacquer, shellac, or polyurethane; conditioner or washcoat can reduce uneven staining.

Notable Features

Visible large pores and warm reddish cast are consistent with red oak; the sample appears plain-sawn and relatively clear.

Learn more about Likely red oak; alternatives include white oak or ash in the Wood Encyclopedia
Identified September 20, 2026