Most likely Douglas-fir; alternatives include pine or western hemlock. — Pseudotsuga menziesii

Most likely Douglas-fir; alternatives include pine or western hemlock.

Pseudotsuga menziesii · Softwood (conifer)

AI-generated identification · may be incorrect
Type
Softwood (conifer)
Origin
Native to western North America, especially the Pacific Northwest and interior mountain regions.
Hardness
620 lbf Janka; Soft.
Durability
Slightly Durable: heartwood has limited decay resistance and is not naturally highly insect- or weather-resistant.

Got a wood sample like this?

Identify any wood from a photo, free.

Identify wood

Grain Pattern

Predominantly straight, coarse grain with prominent earlywood/latewood bands; rough chainsaw-cut end grain and no distinctive figure visible.

Color & Appearance

Heartwood is likely pinkish orange to reddish-brown, with paler sapwood; weathering and oxidation may darken it gray-brown. Limited luster is visible.

Hardness (Janka)

620 lbf Janka; Soft.

Durability & Decay Resistance

Slightly Durable: heartwood has limited decay resistance and is not naturally highly insect- or weather-resistant.

Value & Age

Estimated Market ValueNot an official valuation

Approximately $3–$8 per board foot for ordinary dry lumber; rough green offcuts are worth substantially less.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate
Tree age and sample age cannot be determined from this fresh, bark-covered cross-section; it appears recently cut rather than aged.

Common Uses

Framing, beams, posts, plywood, doors, trim, furniture, flooring, and general construction lumber.

Geographic Origin

Native to western North America, especially the Pacific Northwest and interior mountain regions.

Workability

Machines and hand-tools well, though resin, knots, and alternating grain can cause tearout; sands, glues, nails, and screws readily.

Finish Recommendations

Dry thoroughly, remove loose fibers, and sand progressively; use stain conditioner if staining, followed by oil, lacquer, shellac, or polyurethane.

Notable Features

Strong resinous odor may be present; visible annual rings suggest relatively rapid growth and ordinary structural stock.

Learn more about Most likely Douglas-fir; alternatives include pine or western hemlock. in the Wood Encyclopedia
Identified September 21, 2026