Most likely White Oak; alternatives include Red Oak or ash.
Quercus alba (alternatives: Quercus rubra or Fraxinus spp.) · Hardwood; likely North American oak.
AI-generated identification · may be incorrect- Type
- Hardwood; likely North American oak.
- Origin
- Eastern and central North America, especially the Appalachian, Midwest, and southeastern United States.
- Hardness
- Janka approximately 1,360 lbf — Hard.
- Durability
- Durable; white oak heartwood has good resistance to decay and weathering, while sapwood is less resistant. Red oak would be somewhat less durable.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Straight, coarse, open-pored grain with prominent elongated earlywood pores; appears plainsawn or riftsawn, without notable decorative figure.
Color & Appearance
Pale tan to light brown heartwood with lighter cream sapwood and modest ray fleck; typically darkens slightly amber-brown with age and light.
Hardness (Janka)
Janka approximately 1,360 lbf — Hard.
Durability & Decay Resistance
Durable; white oak heartwood has good resistance to decay and weathering, while sapwood is less resistant. Red oak would be somewhat less durable.
Value & Age
Approximately $6–$12 per board foot for clear, kiln-dried white oak; premium quarter-sawn stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from this clean, apparently fresh board; it shows little visible patina or wear.
Common Uses
Furniture, flooring, cabinetry, doors, trim, barrels, boatbuilding, veneer, and general joinery.
Geographic Origin
Eastern and central North America, especially the Appalachian, Midwest, and southeastern United States.
Workability
Machines and sands well, though open pores and interlocked areas can cause tearout; predrilling is advisable and tannins may react with iron fasteners.
Finish Recommendations
Sand progressively and fill pores if a smooth surface is desired; oil, shellac, lacquer, or polyurethane all work well. Water-based finishes may accentuate grain contrast.
Notable Features
Distinctive open pores, strong ray structure, good dimensional stability, and characteristic oak medullary fleck when quarter-sawn.
