Likely pine; the image is insufficient to distinguish a species. Possible alternatives include spruce or fir.
Pinus spp. (tentative) · Softwood
AI-generated identification · may be incorrect- Type
- Softwood
- Origin
- Pines are widespread across the Northern Hemisphere; exact origin cannot be inferred from the image.
- Hardness
- Species-dependent: commonly about 380–690 lbf for pine, ranging from Very Soft to Soft.
- Durability
- Generally Non-durable to Slightly Durable in untreated heartwood; resistance varies by species and is typically limited against rot and insects.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, longitudinal grain with subtle variation; appears flat-sawn. No distinctive figure is visible.
Color & Appearance
Pale cream to light pink-tan, with darker gray-brown discoloration near one end. Surface appears matte; aging or light-related color change cannot be determined from the image.
Hardness (Janka)
Species-dependent: commonly about 380–690 lbf for pine, ranging from Very Soft to Soft.
Durability & Decay Resistance
Generally Non-durable to Slightly Durable in untreated heartwood; resistance varies by species and is typically limited against rot and insects.
Value & Age
Common pine lumber is often roughly $2–$8 per board foot retail, varying widely by species, grade, and region.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from this image; no clear patina or wear indicators are visible.
Common Uses
Construction framing, furniture, cabinetry, shelving, trim, and some turning or carving.
Geographic Origin
Pines are widespread across the Northern Hemisphere; exact origin cannot be inferred from the image.
Workability
Usually easy to saw, plane, sand, and glue; soft fibers can dent, and resin or knots may complicate machining and finishing.
Finish Recommendations
Sand evenly and apply a suitable sealer or conditioner before stain to reduce blotching; clear varnish or polyurethane is also suitable.
Notable Features
The pale color and straight grain are consistent with common softwood, but visible details do not establish resin content, scent, or species.
