Most likely Douglas fir; alternatives include southern yellow pine or another construction softwood. — Pseudotsuga menziesii

Most likely Douglas fir; alternatives include southern yellow pine or another construction softwood.

Pseudotsuga menziesii · Softwood (conifer)

AI-generated identification · may be incorrect
Type
Softwood (conifer)
Origin
Native to western North America, especially the Pacific Northwest and inland western ranges.
Hardness
Janka approximately 620 lbf — Soft.
Durability
Slightly durable; generally poor-to-moderate resistance to decay and insects unless protected from moisture.

Got a wood sample like this?

Identify any wood from a photo, free.

Identify wood

Grain Pattern

Mostly straight, moderately coarse grain with broad earlywood/latewood bands; appears flat-sawn and unfinished, with no distinctive figure.

Color & Appearance

Pale pinkish tan to light brown heartwood with lighter sapwood; low to moderate luster and likely orange-brown darkening with age and light.

Hardness (Janka)

Janka approximately 620 lbf — Soft.

Durability & Decay Resistance

Slightly durable; generally poor-to-moderate resistance to decay and insects unless protected from moisture.

Value & Age

Estimated Market ValueNot an official valuation

Roughly $2–$6 per board foot for ordinary clear/appearance stock; construction-grade material may be less.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate
Cannot be reliably dated from this image; it appears relatively fresh, unfinished stock rather than aged or reclaimed wood.

Common Uses

Framing, beams, sheathing, doors, furniture parts, shelving, and general construction lumber.

Geographic Origin

Native to western North America, especially the Pacific Northwest and inland western ranges.

Workability

Machines and sands well, though resin, knots, and pronounced earlywood can cause fuzzing or uneven planing; predrilling helps reduce splitting.

Finish Recommendations

Sand progressively, seal porous end grain, then use stain conditioner or a washcoat before stain; polyurethane, lacquer, oil, or paint are suitable.

Notable Features

Distinctive growth-ring contrast and occasional resinous scent are typical; the broad, soft earlywood is visibly compressed on the end grain.

Learn more about Most likely Douglas fir; alternatives include southern yellow pine or another construction softwood. in the Wood Encyclopedia
Identified September 13, 2026