Most likely Douglas fir; possible southern yellow pine or another construction softwood.
Pseudotsuga menziesii · Softwood (conifer).
AI-generated identification · may be incorrect- Type
- Softwood (conifer).
- Origin
- Native to western North America, especially the Pacific Northwest and coastal British Columbia; widely plantation-grown elsewhere.
- Hardness
- Approximately 660 lbf Janka—Soft.
- Durability
- Slightly durable: heartwood has limited decay resistance; sapwood is vulnerable to rot and insects, especially outdoors.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
The end grain shows coarse, open latewood bands and resinous texture; face grain appears mostly straight, though the sample is too rough to assess figure or sawing orientation.
Color & Appearance
Likely pale pinkish-brown to orange-brown heartwood with lighter cream sapwood; Douglas fir commonly darkens modestly to amber-brown with light exposure.
Hardness (Janka)
Approximately 660 lbf Janka—Soft.
Durability & Decay Resistance
Slightly durable: heartwood has limited decay resistance; sapwood is vulnerable to rot and insects, especially outdoors.
Value & Age
About $2–$6 per board foot for ordinary construction-grade stock; clear or select material may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from this fresh, rough-sawn appearance; it appears recently milled rather than visibly aged.
Common Uses
Framing lumber, beams, plywood, flooring, doors, furniture, millwork, and general construction.
Geographic Origin
Native to western North America, especially the Pacific Northwest and coastal British Columbia; widely plantation-grown elsewhere.
Workability
Machines and sands reasonably well but may splinter or tear out; resin can foul blades and interfere with finishing. Gluing and fastening are generally straightforward.
Finish Recommendations
Sand progressively, seal porous end grain, and use an oil, stain, lacquer, or polyurethane; a conditioner or sanding sealer can improve stain uniformity.
Notable Features
Coarse texture, pronounced earlywood/latewood contrast, moderate stiffness, and occasional resin scent; end-grain identification is inconclusive without magnification.
