Likely pine; the image is insufficient to distinguish a specific species. Alternatives include spruce or fir.
Pinus spp. (tentative; possibly Picea spp. or Abies spp.) · Softwood
AI-generated identification · may be incorrect- Type
- Softwood
- Origin
- Could be from many regions; pines, spruces, and firs grow widely across North America, Europe, and Asia.
- Hardness
- Species-dependent: pine ranges roughly 380–870 lbf, from Very Soft to Medium; spruce and fir are generally in the Soft range.
- Durability
- Generally Non-durable to Slightly Durable when untreated; vulnerable to decay and insects, especially outdoors.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, fine-to-medium grain with subtle growth-ring variation; no prominent figure is visible. The cut orientation cannot be determined confidently.
Color & Appearance
Pale yellow-tan with slight variation and a modest natural luster; no clear heartwood–sapwood boundary is visible. Exposure to light may deepen or yellow the color.
Hardness (Janka)
Species-dependent: pine ranges roughly 380–870 lbf, from Very Soft to Medium; spruce and fir are generally in the Soft range.
Durability & Decay Resistance
Generally Non-durable to Slightly Durable when untreated; vulnerable to decay and insects, especially outdoors.
Value & Age
Common construction-grade softwood is often about $2–$8 per board foot; species, grade, and location affect pricing.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not reliably estimable from this image; the clean, pale surface shows little obvious weathering or patina.
Common Uses
Framing, trim, furniture, shelving, cabinetry, paneling, and general-purpose boards.
Geographic Origin
Could be from many regions; pines, spruces, and firs grow widely across North America, Europe, and Asia.
Workability
Usually easy to cut, plane, sand, glue, and fasten; soft fibers can dent, splinter, or compress, and resin may gum tools or affect finishes.
Finish Recommendations
Sand evenly and seal knots or resinous areas if present; use clear varnish, polyurethane, lacquer, or oil. Test stain first, as softwoods can absorb it unevenly.
Notable Features
The visible board is pale and relatively uniform, without clearly discernible knots or resin pockets; end grain is not shown well enough for identification.
