Likely genuine mahogany; alternatives include sapele or African mahogany.
Most likely Swietenia macrophylla; alternatives Entandrophragma cylindricum or Khaya spp. · Hardwood; tropical/exotic.
AI-generated identification · may be incorrect- Type
- Hardwood; tropical/exotic.
- Origin
- Central and South America for big-leaf mahogany; related alternatives originate in West or East Africa.
- Hardness
- Approximately 900–1,070 lbf Janka, classified Medium.
- Durability
- Moderately Durable to Durable; generally resistant to decay, but outdoor performance depends strongly on exposure and finish.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Appears predominantly straight and moderately fine, with subtle ribboning or interlock; no clear figured pattern is visible. End grain is not shown, limiting certainty.
Color & Appearance
Warm reddish-brown heartwood with relatively little visible sapwood and a soft, subdued luster. Mahogany commonly darkens and reddens with age and light exposure.
Hardness (Janka)
Approximately 900–1,070 lbf Janka, classified Medium.
Durability & Decay Resistance
Moderately Durable to Durable; generally resistant to decay, but outdoor performance depends strongly on exposure and finish.
Value & Age
Approximately $8–$20 per board foot for clear, kiln-dried genuine mahogany; figured or certified stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from this photograph; the surface appears finished, with no diagnostic patina or wear evidence.
Common Uses
Furniture, cabinetry, doors, boat interiors, architectural millwork, veneer, carving, and musical instruments.
Geographic Origin
Central and South America for big-leaf mahogany; related alternatives originate in West or East Africa.
Workability
Generally machines, sands, glues, and finishes well; interlocked grain can cause localized tear-out. Pre-drilling is recommended for fasteners.
Finish Recommendations
Use sanding sealer followed by lacquer, shellac, or clear polyurethane; penetrating oil enhances warmth but may darken the surface.
Notable Features
Lightweight for its strength, dimensionally stable, warm reddish coloration, and attractive satin luster.
