Most likely white oak; alternatives include red oak or ash.
Quercus alba (probable); Quercus rubra or Fraxinus spp. possible. · Hardwood; likely domestic North American lumber.
AI-generated identification · may be incorrect- Type
- Hardwood; likely domestic North American lumber.
- Origin
- Eastern and central North America, especially the Appalachian, Midwest, and eastern forest regions.
- Hardness
- White oak: about 1,360 lbf Janka—Hard. Red oak is about 1,290 lbf; ash about 1,320 lbf.
- Durability
- Moderately durable to durable; white oak has good decay resistance and relatively good insect resistance, while red oak is less rot-resistant.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, coarse open grain with flat-sawn cathedral figure; narrow darker edge strips may be adjacent boards or frame material. No clear medullary-ray fleck is visible.
Color & Appearance
Pale tan to light brown heartwood with lighter sapwood and modest color variation; surface appears weathered or unfinished. It should amber slightly with light and oil finishes.
Hardness (Janka)
White oak: about 1,360 lbf Janka—Hard. Red oak is about 1,290 lbf; ash about 1,320 lbf.
Durability & Decay Resistance
Moderately durable to durable; white oak has good decay resistance and relatively good insect resistance, while red oak is less rot-resistant.
Value & Age
Approximately $6–$12 per board foot for ordinary kiln-dried white oak; figured or clear stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The board appears recently machined but previously handled or installed; visible dents and fastener holes do not establish tree or lumber age.
Common Uses
Furniture, flooring, cabinetry, interior trim, barrels, boatwork, and general joinery.
Geographic Origin
Eastern and central North America, especially the Appalachian, Midwest, and eastern forest regions.
Workability
Machines and glues well, though coarse grain can tear during planing and dull tools moderately. Pre-drilling is advisable for fasteners.
Finish Recommendations
Ease the surface, sand to 150–180 grit, and use a penetrating oil, clear lacquer, or polyurethane; sanding sealer can reduce uneven absorption.
Notable Features
Open pores, substantial weight, and prominent latewood bands are consistent with oak; the image does not show enough end grain for confirmation.
