Most likely White Oak; alternatives include Red Oak or Ash.
Quercus alba (likely); Quercus rubra or Fraxinus spp. possible. · Hardwood (deciduous).
AI-generated identification · may be incorrect- Type
- Hardwood (deciduous).
- Origin
- Eastern and central North America, especially the Appalachian, Midwest, and eastern woodland regions.
- Hardness
- White Oak: approximately 1,360 lbf Janka—Hard.
- Durability
- Durable; heartwood has good decay and insect resistance, while sapwood is less resistant. Indoor exposure is preferred unless properly protected.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, open-grained, plainsawn with subtle cathedral and elongated flame figure; no prominent medullary-ray fleck visible.
Color & Appearance
Pale straw to light tan with slightly darker brown heartwood and minimal sapwood contrast; generally low-to-moderate luster. It typically amber-browns modestly with age and light.
Hardness (Janka)
White Oak: approximately 1,360 lbf Janka—Hard.
Durability & Decay Resistance
Durable; heartwood has good decay and insect resistance, while sapwood is less resistant. Indoor exposure is preferred unless properly protected.
Value & Age
Approximately $6–$12 per board foot for ordinary clear White Oak; premium figure and kiln-dried grades may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from this clean, unfinished face; it appears relatively new or lightly aged.
Common Uses
Furniture, flooring, cabinetry, architectural millwork, veneer, barrels, and general joinery.
Geographic Origin
Eastern and central North America, especially the Appalachian, Midwest, and eastern woodland regions.
Workability
Machines and glues well, though open pores require filling for a smooth finish; plainsawn areas can show modest tearout. Pre-drilling is advisable for fasteners.
Finish Recommendations
Sand through 180–220 grit, optionally use grain filler, then apply oil, shellac, lacquer, or polyurethane. Water-based finishes preserve the pale color; oil ambers it.
Notable Features
Prominent pores, attractive restrained cathedral figure, good wear resistance, and strong dimensional character typical of oak.
