Likely hard maple (sugar maple), with soft maple as an alternative; the image alone cannot confirm species.
Acer saccharum (likely); possibly Acer rubrum or another Acer species. · Hardwood (temperate).
AI-generated identification · may be incorrect- Type
- Hardwood (temperate).
- Origin
- Sugar maple is native to eastern North America, especially the northeastern United States and southeastern Canada.
- Hardness
- 1,450 lbf for sugar maple — Hard; soft maples are typically lower, around 950 lbf.
- Durability
- Slightly Durable; heartwood has limited decay resistance and is vulnerable to insects and outdoor weathering.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, fine grain with broad cathedral-like figure from flat-sawn areas; a small oval knot or figure is visible. No clear quarter-sawn rays or distinctive curly figure.
Color & Appearance
Pale cream to light tan with subtle pink-brown variation and a small darker figure. Freshly worked appearance; maple generally yellows slightly with age and light exposure.
Hardness (Janka)
1,450 lbf for sugar maple — Hard; soft maples are typically lower, around 950 lbf.
Durability & Decay Resistance
Slightly Durable; heartwood has limited decay resistance and is vulnerable to insects and outdoor weathering.
Value & Age
Approximately US$5–12 per board foot for common kiln-dried maple; figured or premium stock may cost substantially more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be estimated reliably from this image; the pale, clean surface suggests recently worked wood, not a measurable age.
Common Uses
Furniture, cabinetry, flooring, worktops, turning, carving, and musical instruments.
Geographic Origin
Sugar maple is native to eastern North America, especially the northeastern United States and southeastern Canada.
Workability
Machines and sands cleanly, though hard maple can burn or tear out with dull tools; predrilling is useful for screws. Glues and finishes well with proper surface preparation.
Finish Recommendations
Sand evenly and apply clear oil, lacquer, shellac, or polyurethane; use a conditioner or washcoat if staining to reduce blotching.
Notable Features
Fine, even texture and good wear resistance; the visible knot/figure is local rather than evidence of a figured grade.
