Likely American beech; alternatives include hard maple or yellow birch.
Fagus grandifolia (most likely) · Hardwood; temperate North American species.
AI-generated identification · may be incorrect- Type
- Hardwood; temperate North American species.
- Origin
- Eastern and central North America, especially the northeastern United States and southeastern Canada.
- Hardness
- Janka approximately 1,300 lbf — Hard.
- Durability
- Slightly durable; it has limited natural resistance to decay and insects, especially outdoors or in damp conditions.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine, and closed-grained with subtle cathedral patterns from flat-sawn boards; knots and small natural defects are visible, with no distinctive figure.
Color & Appearance
Pale cream to warm tan heartwood and sapwood with fairly uniform color; it develops a warmer golden-brown tone with light exposure and finish, with modest natural luster.
Hardness (Janka)
Janka approximately 1,300 lbf — Hard.
Durability & Decay Resistance
Slightly durable; it has limited natural resistance to decay and insects, especially outdoors or in damp conditions.
Value & Age
Approximately US$5–12 per board foot for clear kiln-dried stock; figured or exceptionally wide boards may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The boards appear freshly milled or lightly stored; visible color and edges provide no reliable evidence of historical age.
Common Uses
Furniture, flooring, workbenches, cabinetry, chair parts, turning, steam-bent components, and veneer.
Geographic Origin
Eastern and central North America, especially the northeastern United States and southeastern Canada.
Workability
Machines and sands well, though interlocked areas can tear out and it can burn when machined aggressively. It glues and finishes reliably but is relatively heavy and hard on cutting edges.
Finish Recommendations
Apply sanding sealer or a thin wash coat, then oil, shellac, lacquer, or polyurethane; water-based finishes may raise the grain, so pre-raise and sand lightly.
Notable Features
Fine, uniform texture, good wear resistance, and excellent steam-bending behavior; the knots suggest lower furniture-grade clarity.
