Unidentified softwood; likely a locally milled pine, with fir or spruce as alternatives
Pinus spp. (tentative; species cannot be determined from this image) · Softwood
AI-generated identification · may be incorrect- Type
- Softwood
- Origin
- Cannot be inferred from the photo; pines, firs, and spruces grow across many regions.
- Hardness
- Species-dependent; common pines are roughly 380–870 lbf, ranging from Very Soft to Medium.
- Durability
- Likely Non-durable to Slightly Durable untreated; resistance to decay and insects varies by species and heartwood content.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, with visible growth-ring bands across the rough-sawn face; no distinctive figured grain is apparent. End grain is not visible.
Color & Appearance
Pale tan to light brown with darker growth-ring lines and surface grime; the rough, weathered face limits assessment of original color and luster.
Hardness (Janka)
Species-dependent; common pines are roughly 380–870 lbf, ranging from Very Soft to Medium.
Durability & Decay Resistance
Likely Non-durable to Slightly Durable untreated; resistance to decay and insects varies by species and heartwood content.
Value & Age
Ungraded rough-sawn pine commonly sells for about US$1–5 per board foot, varying substantially by region, dimensions, and quality.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not reliably estimable from appearance; rough-sawn wear and dirt do not establish the tree's age or time since milling.
Common Uses
Depending on species: framing, boards, crates, furniture, and general construction.
Geographic Origin
Cannot be inferred from the photo; pines, firs, and spruces grow across many regions.
Workability
Usually easy to saw and machine, but knots or resin may gum tools; soft fibers can crush or tear, and screws may split edges without predrilling.
Finish Recommendations
Clean and sand progressively; use a sealer or sanding sealer before clear coats to reduce uneven absorption. Test stain on an offcut.
Notable Features
The image shows a broad rough-sawn surface with regular growth-ring bands, but no clear knots, resin pockets, or diagnostic end-grain features.
